Wednesday, March 30, 2011

The Corner

Having committed myself to building a hanging sink vanity instead of one that is grounded to the earth through a big cabinet, I am consumed with fear and feelings of inadequacy about my ability to build a truly sturdy structure that has one corner hanging in the air.

I started with two layers of thick plywood and glued them together, fastened that to the wall studs on two walls with 4 inch lag bolts, tightened to a terrific torque and finished with thick braces underneath. (I'm preparing for the big one.)

A small elephant could tip-toe on this shelf with no give or creak at all. And still I am not confident in it, even to support a tooth brush, not without some more reinforcement somewhere.

And then there's the corner. I've given this corner more thought than all my combined other thoughts for the past two years, and I still haven't decided what to do with it. I could cut it off and put a tile on the angle, but how would that look?

My first attempt at cutting the hole and the top piece was a bust, but today I got it right. As I suspected, when I got the backer board in place, I changed my mind again about the corner. Nothing is fastened down yet, so I am free to waffle.

When I was a kid, my parents took me to Carter's barber shop. I remember the guy always swiveled the chair around so that I could see myself in the mirror, and he asked if it was OK. He always said the same thing. "I can take it off, but I can't put it back on." Same thing with the corner.

Saturday, March 26, 2011

The Sink Platform


The new sill piece and Willow,
disgusted with me for changing course
I woke up this morning intending to frame the window and doors with new lumber. The old framing was all dinged up and ugly, and it really doesn't fit any more because the walls have all changed position.

I cut out the new sill piece for the window and realized, while holding it in its future position, that I could and should put it on after the tile is in place. Likewise for the door frames since the walls are deeper on one side of each door than the other.

So, instead of tiling up to the framing, I'll do the tile first then rip the framing (I have to do this anyway to compensate for the walls) so that the framing slightly overlaps the tile, giving a nice clean line where wood and tile meet.

OK, then. It's time to build the platform for the sink. I laid out some tile to get an idea how the sink might look. The layout above is about 23 inches wide, but I've decided to make it a little wider. (The sink is only 17 inches wide--it appears bigger in the picture because it's closer to the camera.)

I'm also going to do an angle cut on the front left corner so that it doesn't poke people on the hip as they walk in.

Hopefully I'll get this done today. Then the tiling begins.

I had grown comfortable with the idea of framing because it's my favorite thing to do. I like cutting wood, sanding wood, nailing wood. Downstairs I walked past Cheryl and said, "I think it may be time to start tiling." But she looked confused, as if to say "how it could not be time to start tiling."

Wednesday, March 23, 2011

Stepping Up

By mistake I picked up the white thinset at the store. It really sticks out on the edges I finished up yesterday. I suppose the white is for people who are planning to use a white grout--I'll be using gray instead, so I guess I'll go get the gray thinset, just to stay on the straight and narrow.

I've been thinking about the Libya problem, and it all goes back to my days as a musician, playing at redneck bars and clubs, where it was not uncommon early in the morning, out in the parking lot, to see some drunk guy being mean to his girlfriend or wife, grabbing her by the arm and yelling, punishing her for his own pathetic existence.

The police would be called, and the guy led away in handcuffs, though you would see him (and the woman) back again in a few nights. Still, something has to be done.

But what about a civil war? Can you protect the innocent people on one side and not the other? And can you ignore one country (Sudan) and not another just because of oil? Isn't that like the police arresting the drunk guy just because they think his girlfriend is cute?

Cheryl made one last attempt at the antique store to find a small cabinet for our sink. Looks like I'll be building the vanity into the wall. Oh, well, it's easier than managing world politics.

Monday, March 21, 2011

Mesh Tape

I've finished sticking the mesh tape to the joints of the wall boards; the next step is to trowel a thin layer of mortar (called thinset) through the mesh and into the empty corner spaces between the boards, with the intent of keeping the walls from expanding and contracting over time.

In the old bathroom, the builders accomplished this structural integrity with steel mesh and truckloads of mortar. Our new bathroom is what you might call disaster-lite--it probably would not survive an earthquake like the one in Japan, so we'll keep our fingers crossed.

I read that the entire country of Japan has shifted position: 8 feet to the east in some places, and 3 feet down. Now some towns are under water at high tide. Even the planet has shifted position, causing the days to become shorter, though apparently this type of shifting happens all the
time
.

We use the same taping process for the drywall, only with different materials. Here I've put on some tape and an initial layer of drywall joint compound to hide the 1/4 in. edge of the backer board on the ceiling. I'll need a few more layered coats to make this all appear flat, allowing me to bring the ceiling tiles to a good stopping place (instead of all the way to the edge).

And this approach will allow me to line up the tiles so the joint lines go up one wall, across the ceiling, and then down the other wall in clean, unbroken lines. If the tiles don't line up, I will be punished by that fact forever and will be aware of nothing else when in the bathroom or any other room in the house.

Sunday, March 20, 2011

A Smudge of Ink

About 25% of the bathroom wall space will be painted instead of tiled, so it gets drywall instead of backer board. Drywall is much easier to cut and install--it's nothing more than a hard sandwich of talcum powder.

The trickiest piece of drywall had two cuts: a little one for the light fixture above the sink and one for the air duct. I measured the openings and then drew them onto the board along with a big FRED. Like every single thing I've done to this point, my signature will be not be visible at the project's end. If this is a metaphor for life I'm not inclined to pursue it here...

...Or maybe I will. Yes, my signature will first be covered with some spray-on texture stuff we found at Home Depot--if it works. Otherwise I'll use a sponge or something to emulate the plaster texture (called orange peel texture) that's on most of the walls in the house. Then it will get a couple coats of paint.

Like me, my signature will be buried and forgotten before too long, a smudge of ink covered in sand. Too gloomy? (Can't a guy be gloomy now and then?)

Anyway, I hate doing drywall, and I always have. It is too forgiving, too flimsy and artificial, though it may last for centuries. (I don't care.)

Very soon, the project becomes visible: tile, texture, paint. Maybe I should sign the wall after I paint?

Wednesday, March 16, 2011

Doing Right and Feeling Good

We've been deliberating on how to install our new sink. Seeing an opportunity to make Cheryl happy (which is my goal in life), I asked her to go antique shopping to find a table that would work as a vanity for the sink. It would have to be a small table, but a tall one. Off she went.

The other option is for me to build a table into the wall. The sink is opposite the toilet, and the room is only 5 feet wide. Not much wiggle room. Of course, the toilet is not actually in the bathroom now so I'm using my memory and some yoga squatting to see where my knees would go when I sit down. Under the sink, it seems. How would a table even fit?

And if I'm going to build a table top, everything needs to be perfect. I had to own up to the fact that I did a terrible job on the sink wall: the board was not aligned well, it was squeezed into place, the holes for the plumbing appeared to be roughed out with a chain saw, and I didn't put up any moisture barrier (even though there's plenty of water in a sink).

So I redid it all, and now I feel much better.

After a few hours Cheryl returned empty-handed from antique shopping. "You'll have to make the table yourself. There isn't a thing out there." I think she felt better for looking, though.